Automatic Tube End Chamfer Machine with Ce Certificate (TEF508CPV)

1. Dimensions: Long X Wide X High=580X820X1200mm
2. Weight: 350 kg
3. Power supply: 380V±10%, 50Hz/60Hz, three phase
4. Power: 4.5 KW
5. Air pressure: 0.4-0.8MPa;
6. Clamping mode: pneumatic;
7. Clamping force: >=10KN;
8. Rotation axis: servo motor, 2.0kw;
9. Forward axis: servo motor, 2.0kw;
10. Tube position axis: servo motor, 0.2kw;
11. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
12. Forward axis positioning accuracy: ≤0.01 mm;
13. Forward axis repeat positioning accuracy: ≤0.01 mm;
14. Rotation axis deflection: ≤0.01 mm;
15. Control mode: digital control;
16. Control variables:

• Clamp opening, closing,
• Rotation axis direction and speed;
• Forward axis origin, enable position,feed positon,limit position, speed;
• Position axis origin,feed position,speed;
• Positioner plate opening, closing;

1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
2. Tube WT of chamfer/squaring/deburring: ≤10mm;
3. Tube OD of flaring: Φ 3-50 mm;
4. Tube WT of flaring:Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
5. Flaring method: eccentric inner diameter rotary swage;
6. Tube OD of beading: Φ6-45 mm;
7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
8. Beading method: inner diameter rotary swage;
9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;

1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
2. After quick change dies, it can complete the tube flaring processing and beading.
3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
5. Forward axis: feed distance digital control, driven by the absolute value servo motor, guarantee the accuracy and safety.
6. Rotation axis: rotation speed digital control, driven by the absolute value servo motor, the speed is continuously variable adjustable, suitable for the processing of different materials.
7. Tube position axis: fixed length digit control, driven by the absolute value servo motor, ensure that the tube end is in the length to ensure repeatability.
8. Automatic operation enable foot switch to start, automatic feed, automatic reset.
9. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
10. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.

1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
2. Servo control of motor, to achieve the spindle high precision control.
3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
5. Tube feed stopper: when the spindle forward, stopper automatic rise. Feed length is digital adjustable.
6. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.

1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness. 
   
4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
   

1. Dimensions: Long X Wide X High=580X820X1200mm
2. Weight: 350 kg
3. Power supply: 380V±10%, 50Hz/60Hz, three phase
4. Power: 4.5 KW
5. Air pressure: 0.4-0.8MPa;
6. Clamping mode: pneumatic;
7. Clamping force: >=10KN;
8. Rotation axis: servo motor, 2.0kw;
9. Forward axis: servo motor, 2.0kw;
10. Tube position axis: servo motor, 0.2kw;
11. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
12. Forward axis positioning accuracy: ≤0.01 mm;
13. Forward axis repeat positioning accuracy: ≤0.01 mm;
14. Rotation axis deflection: ≤0.01 mm;
15. Control mode: digital control;
16. Control variables:

• Clamp opening, closing,
• Rotation axis direction and speed;
• Forward axis origin, enable position,feed positon,limit position, speed;
• Position axis origin,feed position,speed;
• Positioner plate opening, closing;

1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
2. Tube WT of chamfer/squaring/deburring: ≤10mm;
3. Tube OD of flaring: Φ 3-50 mm;
4. Tube WT of flaring:Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
5. Flaring method: eccentric inner diameter rotary swage;
6. Tube OD of beading: Φ6-45 mm;
7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
8. Beading method: inner diameter rotary swage;
9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;

1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
2. After quick change dies, it can complete the tube flaring processing and beading.
3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
5. Forward axis: feed distance digital control, driven by the absolute value servo motor, guarantee the accuracy and safety.
6. Rotation axis: rotation speed digital control, driven by the absolute value servo motor, the speed is continuously variable adjustable, suitable for the processing of different materials.
7. Tube position axis: fixed length digit control, driven by the absolute value servo motor, ensure that the tube end is in the length to ensure repeatability.
8. Automatic operation enable foot switch to start, automatic feed, automatic reset.
9. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
10. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.

1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
2. Servo control of motor, to achieve the spindle high precision control.
3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
5. Tube feed stopper: when the spindle forward, stopper automatic rise. Feed length is digital adjustable.
6. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.

1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness. 
   
4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
   

Guardrail

Guardrail

Hot dipped galvanized Steel Guardrail /Highway fence and guardrail posts are mainly used for safety traffic barrier protection on highways and first-class highways at home and abroad. Q235 material is used domestically, and Q345 material is used abroad. The steel plate is formed by cold bending and then galvanized and electrostatically sprayed.

Guardrail Safety has strong corrosion resistance, bright and beautiful appearance, and high anti-collision strength, which meets the standards of the Ministry of Communications. , In line with GB / T31429.1-2015 "Anti-corrosion Conditions of Expressway Traffic Engineering Components" standard. Requirements of "Waveform Steel Guardrail Part 1: Double Waveform Motorway Guardrail"

Guardrail Fence,Guardrail Details,Guardrail Post,Guardrail Safety

ShandongHengfeng Group , https://www.luhengfeng.com