Other Frp Product,Frp Panels,Frp Wall Panels,Grp Pipe HEBEI DONGDING CHEMICAL TRADE CO.,LTD , https://www.hebeiopct.com
1.      Specification of rolling material: Width: 480mm; Thickness:3-4mm;        Q235A Galvanized steel sheet.
2.      Working speed: 10 -12m/min
3.      Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4.      Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5.      Material of main shaft: superior 45# steel, tempered.
6.      Diameter of main shaft: ¢85 mm
7.      Main motor power: 35 kw
8.      Transmission:double-row chain drive
9.      Structure of forming machine: wallboard
10.    Flattening motor power: 2.2 kw
11.    Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12.    Material of Punching and Cutting mould:Cr12
13.    Cutting blade heat-treated.:HRC58°-62°
14.    Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15.    Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16.  Machine dimension:13500mm×2700mm×1600mm
Equipment configuration
Manual Feeding device (3 T capacity) transmission flattening device before-punching device (2 sets) main machine and roller (including guide table) cutting (after roll forming) device, hydraulic system electric control system run out table
Bohai Highway Guardrail Roll Forming Machine
Model NO.: BH-HG
Origin: Liaoning Province of China
HS Code: 8455229090
Main parameter