Aluminum plate is the thickness of above 0.2mm to below 500mm, more than 200mm width, length within 16m aluminum material called aluminum plate or aluminum sheet, below 0.2mm for aluminum,200mm width within the bar or bar (of course, with the progress of large equipment, the widest can do 600mm aluminum plate is also more).
Aluminum plate refers to the rectangular plate made of aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and pattern aluminum plate.
Aluminum plate is usually divided into the following two types:
1. According to the alloy composition:
High purity aluminum sheet (rolled from high purity aluminum with content above 99.9)
Pure aluminum plate (basically made of rolled pure aluminum)
Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum Copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)
Composite aluminum plate or brazed plate (special purpose aluminum plate material obtained by means of composite of multiple materials)
Aluminum clad aluminum sheet (aluminum sheet coated with thin aluminum sheet for special purposes)
2. Divided by thickness :(unit mm)
aluminum sheet (aluminum sheet) 0.15-2.0
Conventional plate (aluminum sheet) 2.0-6.0
Medium plate (aluminum plate) 6.0-25.0
Thick plate (aluminum plate) 25-200 super thick plate more than 200
Drawing aluminum plate: The manufacturing process of repeatedly using sandpaper to scrape the aluminum plate out of the line, the main process is divided into three parts: deester, sand mill, washing. In the drawing process of aluminum plate, the special skin film technology after anode treatment can generate a skin film containing the metal composition on the surface of aluminum plate, and clearly show each fine wire trace, so that the fine hair luster in the metal matte.
Aluminum oxide plate: aluminum plate is placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, under specific conditions and external current, electrolytic aluminum plate formed. The anodic aluminum plate is oxidized to form a thin layer of alumina on the surface, the thickness of which is 5 ~ 20 microns, and the hard anodic oxide film can reach 60 ~ 200 microns.
PS aluminum plate (advertising aluminum plate, also known as printing zinc plate, newspaper plate) : that is, on the back of the printing pattern thickness of 025 or 03 materials of aluminum plate.
Mirror aluminum plate: refers to the aluminum plate treated by rolling, grinding and other methods, so that the surface of the plate presents the mirror effect.
Embossed aluminum plate can also be called aluminum embossed plate: on the basis of aluminum plate, after calendering and forming a variety of patterns on the surface of the aluminum products, widely used, mainly in packaging, construction, curtain wall and other aspects.
Aluminium plate,Aluminium sheet,Aluminum Alloy Plate,aluminium checkered plate Shandong Longhao Steel Group Co., Ltd. , https://www.longhaosteels.com
JYS-01-01
Tube Size
Inlet32mm      oulet 25mm
Suction
1m
Tube surface treatment
Power coating
Rotation
70r/min
Galvanization
Flow
28kg/min Â
Chrome plating
Qty
10pcs
Pump body diameter
135mm
Inner box
36*18*153Â cm
Lift
7m
Carton box
80*38*37.5cm
Â
Â
G.W./N W.:
21/20kg
Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
  7.Can not be extracted water and acid and alkali chemical solution!
Â
JYS-01-01
Tube Size
Inlet32mm      oulet 25mm
Suction
1m
Tube surface treatment
Power coating
Rotation
70r/min
Galvanization
Flow
28kg/min Â
Chrome plating
Qty
10pcs
Pump body diameter
135mm
Inner box
36*18*153Â cm
Lift
7m
Carton box
80*38*37.5cm
Â
Â
G.W./N W.:
21/20kg
Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
  7.Can not be extracted water and acid and alkali chemical solution!
Â
Hand Operated Gear Oil Pump
Model NO.: JYS-01-01
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Origin: China
HS Code: 84312000
Model NO.: JYS-01-01
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Origin: China
HS Code: 84312000