Barrier debugging method:
1. Adopt the all-wireless control method, which is safe and convenient, as long as you will access the 220V power supply and the shell protection grounded, you can enter the working state, to avoid the complex wiring, wiring work.
2. Adopting special balance mechanism design, the aluminum gear box is connected to make the brake lever slow to start, fast acting and slow stop, making the whole machine core low noise, fast heat dissipation, stable and durable operation, no inertia and so on.
3. The barrier has a variety of interfaces, you can access the vehicle detector (ground sense), infrared radiation and other accessories, with the requirements of barrier security, you can access the charging system to achieve automatic management (need to match )
4. Barrier lever balance adjustment method:
1 The brake has been adjusted according to the length of the bar of the barricade and the weight of the bar. The bar length and weight must not be changed without special circumstances. Otherwise, the balance must be established after professional adjustment.
2 If there is a shake when the lifting rod is encountered, adjust the spring slightly to adjust, the lever vibration is the spring force is too large to relax the spring a few times. If the lever shakes, please tighten the spring several times to the state.
3 reference spring selection table
CNC Turning
CNC Turning is namely Lathe machining, Lathe machining is a portion of mechanical processing.
Lathe machining is always a process that turning tools doing turning machining to a rotary workpiece. On CNC lathes, the operators or the engineers also can use drills, reamers, screw taps, threading dies and knurling tools to make relative machining work. CNC turning is usually applied to machining shafts, plates, bushings and all other workpieces which have rotary surfaces, it is a very widely application in practical mechanical manufacturing.
CNC turning can be divided into rough turning and finish turning, rough turning is for the purpose of machining with big cutting depth and big feed rate, to improve the machining efficiency. However, the precision of rough turning can only be grade IT11, the surface finish can only be Ra 20-10um. On the contrary, semi-finish machining and finish machining usually can only apply high speed but small feeding rate and cutting depth. In this condition, the machining accuracy can be up to grade IT10-7, the roughness can be Ra10-0.6um.
Cnc Turning,Cnc Machining Parts,Die Casting,Aluminum Castings,Malaysia Aluminum Die Casting,Malaysia Aluminum Parts
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.diecastingdie.com
