In summer, the temperature is relatively hot and the sunshine is relatively strong. The sunlight between morning and evening is more dazzling. So for the road sweeper drivers who need to work against the dazzling sun in the morning and evening, the direct sunlight would be a lot of inconvenience for driving safety belts, and it would also bring a lot of danger. It is understood that when the light is strong, the probability of a traffic accident is relatively large. So, what should be done to reduce the damage caused by the dazzling sunlight on driving? 1. The sun visor can be used. The sun visor of the road sweeper can be placed at different angles. The driver can freely adjust according to his own light conditions and sight line problems, but it should be noted that when using the sun visor, It should be as far as possible not to be placed in a position of 90° so that the position of the lower edge is too low, which affects the sight of the traffic sweeper observed by the driver of the road sweeper. 2, driving the road sweeper when the sun is dazzling, will make the eyes appear discomfort, long-term is in such a case, it will make the eyes appear various diseases, so you can stand in the car on a pair of sunglasses. 3. The smog and PM2.5 conditions in each city are not very good. If the body is not cleaned for a few days, it will be covered with dirt or dust. In the absence of sunlight, it may not be visible at ordinary times, but if the body is always facing the sun, then the dust on the glass will be more obvious. This will also directly affect the road sweeper in the fourth quarter. Sightline. For driving safety, the driver of the road sweeper should be required to clean the windshield after driving. 4. On narrow roads where the vehicles are crowded and the roads are relatively parallel, or on roads where the non-motor vehicles and the motor vehicles are not obvious, the shaded areas on the roads are not very regular, but the drivers are To switch between direct sunlight and shady traffic, you will feel very tired visually. So this time should be to slow down the speed, pay more attention to the pedestrians on both sides and the movement of non-motor vehicles to ensure their own driving safety. 5, some vehicles have some chrome on the body of the bright bar, although the shape looks more beautiful, but these decorative strips in the sun is likely to be reflective of the situation, if if the front of the car body reflective contrast Obviously, then it's best not to trail behind. (Text / Sun Ni) Plastic Bottle Caps Making Machines
This series of injection molding machine is mainly suitable for processing various bottle caps.
According to customer's production requirement, small size and middle size machine can be provided.
Also we have PET special machine to produce PET preforms.
Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power.
Program control adopts multiple CPU and high-end DSP chip, which guaranteed smooth and stable control property during high load processing.
BUlk-storage memory that can store many groups of technological parameter.
The application of USB can realize online updating, data export and simple operation.
Plastic Bottle Caps Making Machines,Full Automatic Plastic Bottle Cap,Pet Preform Injection Molding Making Machine,Bottle Cap Making Machine Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com
