Furniture edge sealing glue can be divided into three categories according to the different base materials:
HMPU (polyurethane) base material hot melt adhesive, it is a kind of hot melt adhesive with the best performance, and it is the guarantee of high quality sheet edge sealing. It is expensive and requires special usage.
The performance of furniture edge sealant
Edgebander Glue,Edge Banding Glue,Pur Edgebanding Glue,Edge Banding Hot Melt Glue GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com
It is believed that with the rapid advancement of LED lighting technology and the increase in consumer trust in LEDs, the popularity of LED lighting in the future will be a near future. It is believed that with the rapid advancement of LED lighting technology and the increase in consumer trust in LEDs, the popularity of LED lighting in the future will be a near future.
LED lighting fixtures use LED as the light source, which has more advantages than ordinary lighting fixtures. Needless to say, energy saving and environmental protection, its high efficiency and long life are in line with people's use mentality.
In the past two years, LED lighting has been rapidly developed in the commercial and industrial fields, but with the advancement of technology, LED lighting has begun to enter the field of underwater lighting, and has achieved good results.
At present, there are two main factors that hinder the entry of LED lighting products into the civilian market: on the one hand, because the society's awareness of LED technology and products is still in its infancy, LED lighting fixtures should be popularized, and consumer awareness is still The essential.
On the other hand, because LED lighting fixtures are more expensive than traditional lighting products, most of the ordinary users see short-term cost benefits, and will not put long-term energy-saving benefits in the first place. Therefore, LED lighting penetration The rate has been difficult to achieve.
In order to improve the penetration rate of LED lighting fixtures, we must start from these two aspects. While popularizing LED knowledge, we will gradually reduce the price of LED lighting fixtures by means of technology-driven productivity, and promote the popularization of applications worldwide.
LED lighting fixtures will be the mainstream of future lighting fixture design, playing an increasingly important role. The growing share of the lighting market.
For the underwater light from ordinary lamps to LED straw hat lights, and then replaced by LED straw hat lights to LED patch heads, a revolutionary reform, LED underwater lights stand out in this reform, become a new generation of stars It effectively prolongs the life, effectively reduces the power consumption, effectively increases the brightness, and more effectively realizes more color changes, allowing China's underwater lighting to go to the whole country at a higher speed and to the world.
In the future underwater environment, LED underwater lights will continue to be reformed and moved towards a colorful underwater world.
EVA (ethylene-vinyl acetate copolymer resin) base material hot melt adhesive, this hot melt adhesive can be divided into two types with filler and without filler. Using EVA as the base material is the most common production technology for furniture edge sealing adhesives, and its main limitation is poor heat resistance. The ambient temperature of panel furniture sealed with EVA hot melt adhesive shall not be higher than 120°C;
POL YAMIDE (polyamide) based hot melt adhesive, this hot melt adhesive has good heat resistance and fast curing characteristics, the main disadvantage is that it is expensive.
1. Viscosity of furniture edge sealant
The viscosity of furniture edge sealing glue does not directly reflect the performance of the glue. In general, the higher the viscosity of the furniture edge sealant, the better its initial tack strength, but the worse the coating performance. Low-viscosity hot melt adhesives have a smaller amount of glue and better wetting properties. Some hot melt adhesives with low viscosity and fast curing speed may also have high initial tack strength.
2. Density of furniture edge sealing glue
The density of furniture edge sealant is generally 0.95-1.6g/cm3, and its density depends on the amount of filler.
3. Softening point and use temperature of furniture edge sealing glue
The softening point is an indicator of the heat resistance of the furniture edge sealant. The higher the softening point, the less likely the furniture edge sealant will melt. At the same time, softening point is also an important aspect to measure the temperature resistance of panel furniture.
4. The opening time of the furniture edge banding glue and the feeding speed of the edge banding machine
Furniture edge sealant is widely used in the market because of its solvent-free, water-resistant, and environmental-friendly features.
