countersunk rivet nut 1.Standard:DIN, ISO. 3.Head type:flat head, countersunk head, reduce head, small head, round head, umbrella head, thick head. 4.Size:Â M3-M12;#6-1/2". 5.Finish:self color. 6.Material:SS304, SS316. 7.Body type:smooth body, knurled body, hexagon body, full hex body. 8.Delivery time:Normally in 30-40 days. 9. Package: Cartons&pallets or according to customer's requirement. Nuts: M3-M20 countersunk rivet nut 1.Standard:DIN, ISO. 3.Head type:flat head, countersunk head, reduce head, small head, round head, umbrella head, thick head. 4.Size:Â M3-M12;#6-1/2". 5.Finish:self color. 6.Material:SS304, SS316. 7.Body type:smooth body, knurled body, hexagon body, full hex body. 8.Delivery time:Normally in 30-40 days. 9. Package: Cartons&pallets or according to customer's requirement. Nuts: M3-M20
A Carbon Steel Plate has usually been considered as the steel that does not contain much alloy steel elements, also named as mild steel. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc.
Carbon steel plates are available in different grades depending on the carbon content and strength.
As the content of Carbon increase, the steel plate hardness increases.
Low carbon steel plate: For carbon content 0.06% to 0.25%, also we call it Mild Steel Plate.
Medium carbon steel plate: C content from 0.25% to 0.55%.
High carbon steel plate: 0.55% to 1.0%, also called hard steel plate.
Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.
As the percentage of carbon gets larger, steel can become harder and stronger through heat-treating. Carbon steel is usually heated to change the mechanical properties of steel, usually ductility, hardness, strength, and resistance of impact. Increasing the carbon content of carbon steel makes it harder and stronger, but reduces the steel`s ability to be welded, making it more brittle.
Carbon steel plate is most often used for structural purposes such as buildings, yet it has the flexibility to be worked into ornate designs. Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.
Hot Rolled Steel Plate,Pressure Vessle Steel Plate,4130 Alloy Steel Plate,Abrasion Resistant Steel Plate Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.shansteelsupply.com
2.Grade:8, 8M.
Â
Material : Carbon Steel, Alloy Steel, Stainless Steel, Brass
Surface: ZP, Phosphating, H.D.G, Mechanical Galvanized, Power Coating, Dacromet
Types of Nuts: U Nuts, Hexagon Nuts, Hexagon Weld Nuts, Hexagon Flange Nuts (Plain & Serrated),Square Weld Nuts, Castle/Slotted Nuts, Nylon Insert Nuts, Domed Cap Nuts, Square Nuts, T- Nuts, Lock Nuts and all types of special nuts as per customer's specifications.
Â
Standard
DIN,ASME,SIO,JIS.BS.NFE,GOST
Size Range
Diameter M5 - M64 ; 1/4"- 2 1/2                                                                                                                Length:10-1000mm ; 1/2"-40"
Material
SS304 ,316,316L ,316LN,316 Lmod,316Ti,317L, 317LN, 321,310S, 904L 254SMO AL-6XN,1.4529
Duplex 2205/2507 Hastelloy C4, C22 , C276 , C2000, B2, B3 , G3 , G30 , Hastelloy X          2.4600 , 2.4602 , 2.4603 , 2.4610 , 2.4617 , 2.4619, 2.4665 , 2.4675 , 2.4819 Inconel600, 601 , 617 , 625 , 690 , 718 , 725 , X750                         2.4669 , 2.4668 , 2.4816 , 2.4856 , 2.4851 , 2.4663 , 2.4642 Incoloy800/800H/800HT, Incoloy825 , 90 1, 925 , 926 ,                     1.4958 , 2.4662 , 1.4529 , 1.4876 , 2.4858 , 1.4959 Monelk500, Monel400; 2.4360 , 2.4375 Titanium Alloy GR2/5/7, 3.7035, 3.7165 , 3.7235 Urea steel 724L ,725LN ; 1.4435 , 1.4466 Alloy20, Alloy28, Alloy31, Alloy 286,Alloy 80A(nimonic 80A)              2.4660 , 1.4563 , 1.4562 , 1.4980 , 2.4952
Product range
Bolt , U bolt , Studs , Threaded Bar , Nut , Washers ,Machining Parts
Marking
According to client's requirements ( OEM )Â
MOQ
Washers : 100 pcs, Nut: 50 pcs ,Bolt and Studs:10 pcs
Sample policy
sample can be  provided in free If we have stock,and the buyer pay the freight cost.
Sample time
7-10 days about
In stock items
SS304/316Â Bolt , Nut and washers M6-20
DIN7967 Pal nut M6-20 Titanium Alloy bolt , nut , washers M6-20 Some other sizes may have stock. Â
One stop purchase
We Will  help you to realise one stop purchasing.Our salesman have more than 20 years experience in trading
 Q: Are you trading company or manufacturer ?
And we have independent  trade sales department in Qingdao City.
 Q: How long is your delivery time?
 Q: Do you provide samples ? is it free or extra ?
2.Grade:8, 8M.
Â
Material : Carbon Steel, Alloy Steel, Stainless Steel, Brass
Surface: ZP, Phosphating, H.D.G, Mechanical Galvanized, Power Coating, Dacromet
Types of Nuts: U Nuts, Hexagon Nuts, Hexagon Weld Nuts, Hexagon Flange Nuts (Plain & Serrated),Square Weld Nuts, Castle/Slotted Nuts, Nylon Insert Nuts, Domed Cap Nuts, Square Nuts, T- Nuts, Lock Nuts and all types of special nuts as per customer's specifications.
Â
Standard
DIN,ASME,SIO,JIS.BS.NFE,GOST
Size Range
Diameter M5 - M64 ; 1/4"- 2 1/2                                                                                                                Length:10-1000mm ; 1/2"-40"
Material
SS304 ,316,316L ,316LN,316 Lmod,316Ti,317L, 317LN, 321,310S, 904L 254SMO AL-6XN,1.4529
Duplex 2205/2507 Hastelloy C4, C22 , C276 , C2000, B2, B3 , G3 , G30 , Hastelloy X          2.4600 , 2.4602 , 2.4603 , 2.4610 , 2.4617 , 2.4619, 2.4665 , 2.4675 , 2.4819 Inconel600, 601 , 617 , 625 , 690 , 718 , 725 , X750                         2.4669 , 2.4668 , 2.4816 , 2.4856 , 2.4851 , 2.4663 , 2.4642 Incoloy800/800H/800HT, Incoloy825 , 90 1, 925 , 926 ,                     1.4958 , 2.4662 , 1.4529 , 1.4876 , 2.4858 , 1.4959 Monelk500, Monel400; 2.4360 , 2.4375 Titanium Alloy GR2/5/7, 3.7035, 3.7165 , 3.7235 Urea steel 724L ,725LN ; 1.4435 , 1.4466 Alloy20, Alloy28, Alloy31, Alloy 286,Alloy 80A(nimonic 80A)              2.4660 , 1.4563 , 1.4562 , 1.4980 , 2.4952
Product range
Bolt , U bolt , Studs , Threaded Bar , Nut , Washers ,Machining Parts
Marking
According to client's requirements ( OEM )Â
MOQ
Washers : 100 pcs, Nut: 50 pcs ,Bolt and Studs:10 pcs
Sample policy
sample can be  provided in free If we have stock,and the buyer pay the freight cost.
Sample time
7-10 days about
In stock items
SS304/316Â Bolt , Nut and washers M6-20
DIN7967 Pal nut M6-20 Titanium Alloy bolt , nut , washers M6-20 Some other sizes may have stock. Â
One stop purchase
We Will  help you to realise one stop purchasing.Our salesman have more than 20 years experience in trading
 Q: Are you trading company or manufacturer ?
And we have independent  trade sales department in Qingdao City.
 Q: How long is your delivery time?
 Q: Do you provide samples ? is it free or extra ?
Zinc Nickel Alloy Countersunk Head Cylindrical Rivet Nut
Model NO.: M4-M64
Price: Factory Directly Supplier, Low Price
Quality: More Than 15 Years Production Experience
Certificate: Ce ISO
Parteners: Sgmw, Baic, Haier, Hisense
Service: Protect All The Things You Ordered
Non-Standard Products: Supply All The Sizes
Delivery Time: Normally in 30-40 Days
Trademark: HighFly Fastener
Transport Package: Cartons&Pallets or According to Customer′s Require
Specification: M3-M100; 1/4-4"
Origin: China
HS Code: 7318159090
Model NO.: M4-M64
Price: Factory Directly Supplier, Low Price
Quality: More Than 15 Years Production Experience
Certificate: Ce ISO
Parteners: Sgmw, Baic, Haier, Hisense
Service: Protect All The Things You Ordered
Non-Standard Products: Supply All The Sizes
Delivery Time: Normally in 30-40 Days
Trademark: HighFly Fastener
Transport Package: Cartons&Pallets or According to Customer′s Require
Specification: M3-M100; 1/4-4"
Origin: China
HS Code: 7318159090
 Hengfei Trading Co.,Ltd  supply all types of Nuts:
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Hengfei Trading Co.,Ltd  supply all types of Nuts:
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.