The reporter learned from a number of authoritative sources that at present the relevant departments such as the Ministry of Science and Technology are in the process of adding materials to the key R&D projects. The project plans to invest 2 billion yuan in research and development of 3D printing mainstream technologies and mainstream equipment within three years. Focus on the application of research and development to demonstrate. Industry sources said that with the support of several favorable policies, the 3D printing market is expected to continue to maintain a growth rate of around 40%. In the “13th Five-Year Plan†period, the output value is expected to exceed 20 billion yuan. This year, the 3D printing industry has good news. At the end of August, Premier Li Keqiang presided over a special lecture of the State Council to discuss issues such as accelerating the development of advanced manufacturing and 3D printing. This is the first time that the current government has held special seminars. 3D printing, as an advanced manufacturing technology, first appeared in this session of the State Council. Sources said that the Ministry of Science and Technology and other relevant departments are currently in the process of setting up 3D printing for key R&D projects. This is the implementation of the spirit of the State Council's special lectures, and 3D printing also goes from the policy support level to the financial support level. In recent years, the 3D printing industry and market have seen explosive growth. According to the authoritative Wohlers Report 2015 report, 3D printing covered a $4.1 billion market in 2014. The industry has experienced a compound annual growth rate of 33.8% in the past three years, a strong growth. Wohlers predicts that global sales in 2016 will increase to US$7.3 billion, and in 2018 this figure will be US$12.7 billion. By 2020, the market is expected to reach US$21.2 billion. 3D printing has been strongly supported by the government at the government level and sought after by the capital market. At present, 3D printing concept stocks have been formed in the capital market, including Jubilee Technology, Guangyun Da, Huazhong CNC, and AVIC Heavy Machinery. The Southwest Securities Research Report pointed out that the domestic secondary market is still in the stage of thematic investment for 3D printing, and the design materials, equipment and application services as a whole benefit. In the next few years, China's 3D printing market will still maintain a growth rate of about 40%, and by 2018 it is expected to exceed 20 billion yuan. How to solve the problem of air drying?
4. Drying clothes on the basis of the above steps, you can change the cleaned clothes from outside to indoor, which can increase the indoor humidity.
Aromatherapy humidifier/Aroma Diffuser
Function: Aromatherapy/humidification /clean & reflash air.
Diffuser machines, Scent diffuser machine, Aroma home fragrance diffuser, Reed diffuser home fragrance, Home essential oil diffuser Shenzhen Ewong Technology CO.LTD , https://www.dgewongtech.com
1. Add water, find the humidifier Aroma Diffuser, and clean the humidifier. Reconnect the clean water, receive the required water level and install it back.
2. Turn on humidification, power on the humidifier and turn on the humidification function to humidify the indoor air.
3. Wet mopping can wet the mop with water, mop the floor indoors and wet the indoor ground. Through volatilization, the indoor humidity can be improved.
Purify & reflash indoor air, keep healthy in the room/indoor
Antibacterial and moisturize the skin,enjoy dream all night
* Input voltage: DC24V, Power:12W,Ultrasonic frequency:2.4HZ
* Tank:200ML,Spay time: 6-8hrs,Effective area: 10-20㎡ Noise Ratio< 35dB
* Spray quantity: about 30ml/hr; 10s Intermittent spraying, 1hr/2hr setting.
* LED colofur lighting,manual or automatic switch to ligh,7 color change
* When no water,it will power-off automatically,Timed work
* Warm night lamp, air humidification, charming fragrance, purify the air.
* Egg-shaped,eco-friendly ABS & PP,Frosted surface,shell resistant to row.
* Aromatherapy humidification,Aromatic aroma to Moisten your life.
* Large Fog, not wet desktop,fast moisture, Fragrant aroma.
* Colorful LED night light, brings you comfort and romance in night.
* Function: Aromatherapy/humidification /clean & reflash air.
* Purify & reflash indoor air, keep healthy in the room/indoor
* The humidfy effect to remove dust and static electricity.
* To add some essential oil into the humidifier,clean air.
* Operation and function,Press the spray button
1st press: to start continuous spray, "ON" indicator.
2nd press: to be modes of spray for 1s and stop 10s, "10s" indicator.
3rd press: to 1-hours working mode. "1H" indicator.
4th press: to 2-hours working mode. "2H" indicator.
5th press: long press over 2s to stop working.
