Inaccurate gas phase of the diesel generator set will lead to insufficient intake and exhaust gas, resulting in incomplete combustion, affecting the dynamics, economy and environmental protection of the unit. At this time, appropriate adjustment measures should be taken. Ito Co., Ltd. It is recommended that you make adjustments as follows.
The adjustment should first determine whether the timing gear mounting position is correct, followed by checking whether the gear surface clearance meets the requirements. If individual valves are opened or closed early or late, and the error value is not large, the valve clearance can be adjusted. Adjusting the valve clearance appropriately can correct late, and the valve clearance can be appropriately adjusted to correct early. The commonly used adjustment methods are:
First, the offset camshaft key method
If most of the inlet and exhaust valves are on the side of the valve and the phase difference value is close to the same, the offset key method can be used to adjust. The offset camshaft key method changes the cross-sectional shape of the connecting key of the timing gear and the camshaft to adjust the phase of the valve. The change of the key shape causes the timing position of the timing gear and the camshaft to fluctuate. The corresponding angle is shifted to change the phase of the valve.
Second, the camshaft timing gear axial movement method
Since the timing gear of the lower camshaft is mostly a helical gear, if the camshaft timing gear is axially displaced, the meshing position with the crankshaft timing gear can be changed, so that the camshaft is deflected by a certain angle, thereby changing the gas phase distribution. Position (camshaft axial clearance requirements remain unchanged). In actual repair, the timing gear is generally adjusted by changing the thrust flange thickness or the timing gear hub thickness so that the timing gear can obtain the axial displacement.
The accuracy and reliability of the gas distribution phase have a great influence on the life of the diesel engine and the economic and dynamic performance of the work. Therefore, in the diesel generator set repair process, the gas phase needs to be based on the performance requirements and operating conditions of the diesel engine. The test, verification, and adjustment are performed to obtain a correct or near-reasonable state.
Related reading :
Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine
Aluminum Color Coated Sheet
Aluminum Color Coated Sheet is Aluminum Sheet with color coated on one side or two sides.It is widely used in construction areas.It is light in the weight and easy to be recycled.Also with the color coating,the surface is good looking and has longer life in corrosion resistance.Aluminum Color Coated Sheet has more advantage as follows:
1. Easy to process.
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.