Electrochemical cutting machine works as follows: power cutting material connected to the positive DC power supply, the tool (disc) connected to the negative electrode, between the workpiece and the disc sprayed electrolyte, the workpiece surface anodic dissolution, and the formation of a layer Oxide film prevents complete metal contact of the workpiece and tool. Rotating tools scraping the surface of the workpiece protruding oxide film, when the gap between the two poles shrink to a certain extent (the workpiece is slowly fed so that the gap between the poles always maintain a narrow gap 0.1-1, the electrolyte flow through the gap at high speed), oxidation The membrane is broken down and the bumps are eroded or dissolved. When the voltage is high, the fumes purification plant to cut the main electric role, the lower the voltage to the electrochemical role. The tool is fed in the cutting direction until the cut is completed. Electrochemical processing The reaction of drying ferrous sulfate with the electrolysis process is similar in principle, but more electric heating and mechanical scraping, the cutting speed faster, more efficient, and the current is relatively electrolytic processing is small. Electrolytic processing equipment using voltage 6-12v, power expensive, large electrolytic equipment, manufacturing costs are high (usually several hundred thousand dollars); and electrochemical cutting machine current used in 10-50A, the voltage increased to 20 -30v, a significant reduction in power costs, reduced size, coupled with a reasonable electrolyte tank design, greatly reducing the overall size of electrochemical cutting machine. Custom Plastic Cups,Disposable Plastic Cup,Plastic Drinking Cups,Biodegradable Plastic Cups I-DA STRAW CO., LTD , https://www.ida-straw.com